Superbilgi

Edition November 2026

DIY Custom Frame for Your Frame TV

DIY Custom Frame for Your Frame TV

Learn how to cheaply build a custom frame for the Samsung Frame TV using a few basic tools and a bit of time.

If you’re not familiar with the Frame TV, it’s a television designed to display artwork when not in use—making the TV look like a piece of framed art on the wall. One downside is that Samsung’s TV doesn’t include a decorative outer frame, so if you want a true picture-frame appearance you’ll need to add one.

DIY Frame TV Before and After

Options for Buying a Frame for the Frame TV

There are several ready-made options available, but none fit my style or the space around my TV. I’ll summarize common choices so you can weigh them against a DIY option.

Modern Bezel Frames

These slim plastic bezels snap onto the TV magnetically. They’re sleek and modern, available in multiple colors specifically for Samsung’s Frame TV. Price ranges typically fall between $100–$200. They’re a good option if you like a contemporary look, but I wanted something warmer and more traditional.

Decorative or Deco TV Frames

These larger wood or metal frames offer a finished, decorative appearance and start around $300 or more for larger sizes. Many are beautiful, but they tend to be bulkier. In my space the gap between the TV and surrounding moulding is narrow (less than 2 inches), while many of these frames are around 2.5 inches wide, so they didn’t fit.

DIY Frame

Because store options were either too modern, too large, or too costly, I built a custom frame for about $25. If you prefer a specific profile, narrow moulding, or a stained wood look, making your own frame is an inexpensive and flexible solution.

How to Make a Frame for the Samsung Frame TV

I’ve framed art before, but this was my first time framing the Samsung Frame TV. The goal was a modest profile with pretty trim moulding and a warm stained finish that would fit inside the tight space on either side of the TV.

This guide uses a 55-inch 2020 model as the reference. If your TV is a different size, adjust measurements accordingly.

Note: This post originally contained affiliate links. I mention tools and materials for convenience.

Framed TV over a fireplace mantel in living room

Sources: Samsung Frame TV; Apple Tree Art on TV; Large Blue & White Ginger Jars; Boxwood Topiaries; Wood Basket; Clock on Shelf; Faux Fern; Mini Shelf Lamp

Materials and Tools You Will Need

  • 2 – 1″ x 2″ trim boards (8 feet long)
  • 2 – 3/4″ x 1-1/4″ unfinished wood moulding (8 feet long)
  • Miter saw (or miter shears / hand saw with miter box)
  • Wood glue
  • Brad nailer (or finishing nails and a hammer)
  • 1.5″ finishing nails
  • Pencil
  • Tape measure
  • Corner clamps (optional but very helpful)
  • Sandpaper
  • Stain or paint of your choice
  • Wood putty (optional, if you plan to fill nail holes)

Step-by-Step Instructions

1. Cut the 1 x 2 Boards at 45 Degrees

Measure your TV and cut the inside edge of each 1 x 2 at a 45-degree angle so the boards form mitered corners. Cut two longer pieces for the top and bottom and two shorter pieces for the sides. Make sure the angled cuts are perpendicular so corners fit tightly.

Cut trim at 45 degree angles

2. Clamp the Boards into a Square Frame

Use corner clamps to hold the mitered corners square while you test-fit everything. Corner clamps make it easy to get perfectly aligned 90-degree corners.

Clamp corners with 1 x 2 angled boards

3. Glue and Nail the Corners

Apply wood glue to the mitered joints, clamp, and secure with brad nails or finishing nails. Nail each corner from both sides if possible for extra strength. Allow the glue to dry fully before continuing.

stapling the wood frame

4. Test-Fit the Frame on the TV

Place the assembled frame over the TV to confirm fit. If it’s slightly large, trim the frame down—it’s easier to pare away a little than to enlarge it later.

5. Cut the Decorative Trim at 45 Degrees

Cut the moulding trim pieces to the same lengths and miter angles as the 1 x 2 foundation. Use the foundation frame as a guide to ensure the trim covers the foundation and aligns with the TV edge.

Miter cut at 45 degree angle

6. Fasten the Trim to the Frame Foundation

Apply glue to the trim, align the tall edge flush with the exterior edge of the 1 x 2 frame, and secure with 3–4 brad nails per piece. The trim will typically create a small inside lip that covers the TV’s black bezel; lining this up carefully is important for a polished look.

Attaching two trim pieces to make a frame

If you plan to paint the frame, fill the nail holes with wood putty and sand smooth. For a stained finish, small nail holes are often less noticeable and can be left as-is.

7. Stain or Paint the Frame

Choose stain or paint to match your decor. I tested three stain colors and used a darker walnut to bring a warm wood tone into a room with a lot of white trim. Paint would work equally well if you prefer a solid, even color.

Favorite Stain Colors: Early American, Dark Walnut, and Provincial.

8. Attach the Frame to the TV

Once finished, the frame should slip over the TV and fit snugly. If additional security is desired, use adhesive strips to anchor the frame to the TV or wall. In my case the fit was tight, so the frame stays in place without extra fasteners.

Frame TV above fireplace mantel
Samsung Frame TV with a DIY Wood Frame

9. Optional: Notch Out Space for the TV Sensor

The Frame TV includes a light/motion sensor near the bottom that can turn the artwork on or off based on ambient light and presence. If the frame blocks that sensor, the TV may think the room is dark and turn the art off. If you want the sensor to function, mark its location on the inside of the frame and carefully remove a small notch. I made a series of shallow cuts and removed the waste with a screwdriver, then sanded the opening smooth.

Tiny cuts make notching out easy

After notching and a quick test, the sensor worked nearly as well as before—close enough for me to be satisfied. You can stain the inside of the notch if it’s visible and you want a finished look.

Notch under Frame TV Frame

This DIY frame project was fun and rewarding. For about $25 in materials and a few hours of work, I created a custom stained wood frame that fits my space and style. The method can be adapted to different TV sizes or to frame canvas art, mirrors, and other wall pieces.

DIY Frame for Canvas Art

I ended up using the same framing method on a recent canvas purchase and love the result. If you want a narrow-profile, stained wood frame for a Samsung Frame TV or any artwork, this method is inexpensive, customizable, and effective.

Related ideas to explore:

  • DIY picture frame moulding techniques
  • Beach-inspired framed canvas art projects
  • How to frame a canvas cheaply
  • How to frame a builder-grade mirror
  • Samsung Frame TV review and tips