Superbilgi

Edition November 2026

How to Make a Custom Lampshade: DIY Tutorial

How to Make a Custom Lampshade: DIY Tutorial

Use your own fabric to make a custom lamp shade for your home!

I love finally finishing a project that’s been on my to-do list for years. There’s always a mix of relief, pride, and a little wondering why I waited so long. I planned to make a custom lamp shade for Miss A’s room when we completed it nearly three years ago, but I never found the exact fabric I wanted and kept postponing buying a new shade.

How to Make a Custom Lamp Shade | TheTurquoiseHome.com

The lamp base is one I’ve had since college and I’ve swapped shades a few times. For a while I used an old empire-style shade that didn’t fit well and would have been difficult to cover with fabric. After a few more changes and a little decluttering, I finally decided it was time to make the custom shade I’d been imagining.

Miss A's Pink & Turquoise Nursery | TheTurquoiseHome.com

I’d been meaning to buy a simple drum shade for ages. Once Baby G’s nursery plan started taking shape, I finally picked one up while it was on sale—an affordable drum shade that made this project possible without spending much.

How to Make a Custom Lamp Shade | TheTurquoiseHome.com

The fabric I chose was Michael Miller Wee Wander Woods Petal, a sweet woodland print with a little girl and a deer that fit the nursery’s woodland theme perfectly. I originally planned a different fabric, but this one felt right for the look I wanted.

Michael Miller Wee Wander Woods Petal Fabric | TheTurquoiseHome.com

Michael Miller Wee Wander Woods Petal fabric

With supplies gathered, I finally tackled the lamp shade project that had lingered on my list for years.

Supplies for your Custom Lamp Shade:

  • tacky glue or fabric glue
  • spray adhesive
  • newspaper
  • pen
  • drum lamp shade
  • painter’s tape or regular tape
  • fabric (enough to wrap the shade)
  • ribbon or trim (optional)

Start by creating a paper template. Lay the drum shade on a sheet of newspaper and roll it while marking the top and bottom edges. Cut the newspaper along your marks to form a template. Wrap the template around the shade to test the fit—use tape to hold any seams together and to temporarily secure the paper to the shade while you check the placement.

How to Make a Custom Lamp Shade | TheTurquoiseHome.com

Once the template fits well, use it to cut your fabric. If your fabric has a scene or directional print, choose the portion you want featured at the front of the shade. I had only a yard of fabric, so I pieced an extra scrap to finish the wrap; since the seam sits near the back it’s barely noticeable.

How to Make a Custom Lamp Shade | TheTurquoiseHome.com

Trim the fabric with about an inch of extra at the edges to give a little wiggle room for wrapping. Work in a well-ventilated area—if you’re using spray adhesive, outdoors or a garage is best. Protect your work surface with newspaper.

How to Make a Custom Lamp Shade | TheTurquoiseHome.com

Apply spray adhesive evenly to the back of the fabric and press it onto the shade, smoothing as you go to remove any bubbles or wrinkles. Take your time lining up the pattern so the focal point of the print is centered where you want it.

How to Make a Custom Lamp Shade | TheTurquoiseHome.com

After the fabric is attached, trim the excess to about a half-inch from the edge of the shade. Then run a bead of tacky glue along the inside rim and fold the remaining fabric over, pressing it firmly against the glue. Many shades have an inner piping or lip that helps conceal the folded fabric and gives a neat inside finish.

How to Make a Custom Lamp Shade | TheTurquoiseHome.com

To finish, glue trim or grosgrain ribbon along the top and bottom edges. This step is optional, but it adds a polished, professional look and hides any raw fabric edges. Allow the glue to dry fully before handling or installing the shade on the lamp base.

How to Make a Custom Lamp Shade | TheTurquoiseHome.com

And that’s it—an easy, inexpensive way to personalize a lamp and add character to any room. It’s surprising how much difference a custom shade makes in tying together a nursery or living space. I’m thrilled with how this one turned out and excited to see all the nursery elements come together.

How to Make a Custom Lamp Shade | TheTurquoiseHome.com
How to Make a Custom Lamp Shade | TheTurquoiseHome.com

More posts you might enjoy:

  • 25+ Amazing Table Lamps For Your Home
  • How to Recover a Lamp Shade (for cheap!)
  • 15 Flush Mount Lighting Ideas For Your Home